+1-323-909-4740 blog@hegars.com

KiCAD Footprints and Symbols

Decided to learn how to build some footprints, symbols and 3D models in Kicad so I used a HC-05 Bluetooth module and it’s chips as a template that was not in the default list using the chips datasheets, the TFBGA96 8x8x0,65mm main chip and TFBGA48 6x8x0.80mm...

Radiacmeter IM-174A/PD

http://www.civildefensemuseum.com/southrad/im174apd-1.html TM-11-6665-232-40-7-Dec-81-USAPADownload 50uA Full Swing Meter Using PWM on Arduino requiring a series 100Kohm at 5v to produce 50uA to drive the arm http://tinyurl.com/vdqbuhe Thinking about hooking this up...

4 Way Board

Board https://www.sparkydirect.com.au/p/30298/nls-18-pole-surface-mount-ip54-rated-distribution.html RCD/MCB HAGER ADA910T2 POLE 10AMP 6KA 30MA RCD/MCB COMBO...

Eurocard Subrack Build

Subrack design from standard mill finish aluminium products Specs 3RU 19″ Subrack21 x 20mm wide slots20mm front recess Using 20 x 20 x 1.6 mm Angle20 x 1.6 mm Flat bar16 x 16 x 1.6 mm Angle1.6 mm Flat sheet (132x 220 x 1.6) FR4 160 x 100 x 1.6 mm PCB BOM Side...